Weslo WATL26806.0 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 12

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric cur- rent to reduce the risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances. Note: Your power cord and outlet may appear different.

Important: The treadmill is not compatible with GFCI-equipped outlets.

1

Socket on Treadmill

 

 

Power

 

Cord

2

 

 

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents QUESTIONS? Model No. WATL26806.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Make sure that the power cord is unplugged Tighten the Wheel Bolts the Wheels should Turn freelyWashers 6 do not tighten the Upright Bolts Yet Upright Bolts yetOuter side of the Frame Spacer facing Nut yetWith the outer side of the Frame Spacer fac MAY be Damaged When the Power is Connected PROPERLY, the ConsoleSide View View from AbovePage Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Measure your heart rate if desired HOW to USE a Preset Program Select a preset programWhen the program ends, remove the key from Console HOW to USE the Stereo Sound System Information Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Part LIST-Model No. WATL26806.0 Key No. Qty DescriptionExploded Drawing A-Model No. WATL26806.0 R1206A Exploded Drawing B-Model No. WATL26806.0 R1206A Exploded Drawing C-Model No. WATL26806.0 R1206A Ordering Replacement Parts
Top Page Image Contents