HOW TO USE THE STEREO SOUND SYSTEM
THE INFORMATION MODE
To play music or audio books through the console’s stereo speakers, you must connect your MP3 player or CD player to the console. Plug one end of the included 3.5mm to 3.5mm stereo audio wire into a jack on your MP3 player or CD player. Plug the other end of the cable into the input jack on the console. Make sure that both ends of the audio wire are fully plugged in.
Next, press the Play button on your MP3 player or CD player. Then, adjust the volume of your MP3 player or CD player.
If you are using a portable CD player and the CD skips, set the CD player on the floor or another flat surface in- stead of on the console.
The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console.
To select the information mode, insert the key into the console while holding down the Stop button. When the information mode is selected, the following information will be shown:
An “E” (for English miles) or an “M” (for metric kilometers) will appear in the lower right display. Press the Speed in- crease button to change the unit of measurement, if de- sired.
IMPORTANT: If a “d” appears in the lower right display, the console is in the “demo” mode. This mode is in- tended to be used only when a treadmill is displayed in a store. While the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays will remain lit; the buttons will not operate. If a “d” appears when the in- formation mode is selected, press the Speed de- crease button so the “d” disappears.
The upper display will show the total number of hours that the treadmill has been used.
The lower left display will show the total number of kilo- meters (or miles) that the walking belt has moved.
To exit the information mode, remove the key from the console.
17