Display and Settings

RS2130i EN 15/2/07 4:31 PM Page 16

Source indication

Play Mode status	CD Tray Status:
	Lights up when
	loaded. Flash when
	playing.

5.Press TIMER to select source. Press or to select TUNER/TUNER REC/DISC/USB/iPod. If

TUNER REC is selected, press or to select the preset station.

6.Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level.

7.Press TIMER to save settings.

Press TUNE/PRESET to cancel setting.

The timer is automatically activated once timer setting is saved.

Activating the Timer

Press TIMER to turn on/off the alarm. The timer

icon is displayed when timer is activated.

Setting the Clock

1.Press and hold CLOCK on the remote control until the hour flashes on the display.

2.Press or to set the hour and then press CLOCK to shift to minute digits.

3.Press or to set the minute.

4.Press CLOCK to save settings. Or press TUNE/PRESET to cancel the setting.

Sleep Mode

You can select the time interval in minutes before the unit turns off automatically.

Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.

The SLEEP icon lights on the display when sleep mode is activated.

Timer and Program Recording

You can turn on/off the unit or record TUNER at preset times by setting the timer.

You can use Program Recording to preset the unit to record your favorite radio program. When setting the timer, choose TUNER REC as the source to record radio at the preset time. Ensure there is adequate memory in the USB

device connected.

View and Adjust Remaining Sleep Time

When sleep is activated, press SLEEP once to view remaining sleep time. Press again to change the time.

Note: Sleep is automatically de-activated when the unit is turned off.

Setting the Timer

Showing Demonstration

Press DEMO to turn on/off demonstration mode.

1.Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display.

2.Set the Timer ON setting. Press or to set the hour and then press TIMER to shift to minute digits.

3.Press or to set the minute.

4.Press TIMER to change to Timer Off setting with clock time flashing. Repeat steps 2 & 3 for timer off time setting.