RS2130i EN 15/2/07 4:31 PM Page 21
Record only selected tracks from a CD
1.Create a CD program by following the instructions under “Setting Up a CD Program” on page 14.
2.In CD stop mode, press PROG to enter Program mode.
3.Press RECORD – NORMAL on the main unit or RECORD on the remote control. Playback and recording should begin automatically. The PROGRAM and REC icons will light on the display.
4.Recording stops automatically when the program is finished.
Recording Tuner/AUX to USB drive
1.In Tuner mode, select the station to record (refer to page 10 – 11 for details).
2.Press RECORD – NORMAL on the main unit or RECORD on the remote control to start recording.
3.Press TUNE/PRESET 
or RECORD – NORMAL on the main unit or RECORD on the remote control to stop recording.
Program Recording
Refer to ”Setting the Timer” on page 7.
Deleting All Files
In Navigation and mp3 stop modes, press and
hold DELETE on the main unit, or press DEL on EN the remote control to delete all the files on the
USB drive.
Tips:
•If CD playback has already started, recording will begin instantly when RECORD – NORMAL or RECORD – HIGH SPEED on the main unit or RECORD on the remote control is pressed. If CD playback is stopped, press RECORD – NORMAL or RECORD – HIGH SPEED on the main unit or RECORD on the
remote control and then 
to start recording. Recording will not start until CD starts playback.
•Recording stops automatically when CD stops.
•To view recording time and remaining time, press BAND/INFO on the main unit or INFO on the remote during recording.
Elapsed |
|
|
|
|
| |
recording |
|
| 0:22 |
|
|
|
|
|
|
| |||
time | REM 13 H |
|
| Remaining | ||
|
| |||||
|
|
|
|
|
| Time |
|
|
|
|
| ||
Deleting Files from USB drive
1.In USB Navigation mode, select the file for deletion using the navigation buttons (Refer to “Advanced Navigation Controls” on page 15 for details.)
2.Press DELETE on the main unit or DEL on the remote control.
3.Turn VOLUME CONTROL knob on the main unit or press 
or 
on the remote control to select Yes to delete or No to cancel.
4.Press SELECT on the main unit or press 
on the remote control to confirm selection.
If Yes is selected, the display shows memory usage information after deleting selected file. For a few seconds, the unit will return to the Navigation mode.
•The encoding bitrate for tuner, CD and AUX signal are:
CD/Aux: 128 kbps
Tuner: 96 kbps
12