Assembly

Before beginning assembly, carefully read the following information and instructions:

¥Assembly requires two people.

¥Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed.

¥As you assemble the treadmill, be sure that all parts are oriented as shown in the drawings.

The following tools (not included) are required for assembly:

¥Two (2) adjustable wrenches

¥One (1) phillips screwdriver

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

1.With the help of a second person, carefully lay the treadmill on its side. Position one of the Base Legs (55) on one of the Uprights (37) as shown. Make sure that the Base Leg Pads (31) and the Front Wheel (34) are in the indicated positions. Attach the Base Leg with two Base Leg Bolts (28), two Base Leg Washers (29), and two Base Leg Nuts (30).

With the help of a second person, carefully turn the treadmill onto its other side. Attach the other Base Leg (55) as described above.

With the help of a second person, carefully raise the treadmill to the upright position so that both Base Legs (55) are resting flat on the floor.

2.Hold the treadmill firmly with both hands and lower the treadmill to the floor. To decrease the possibili- ty of injury, bend your legs and keep your back straight.

1	28
	34
	29
37	31
30	55
2