RCA RP-9380 manual Cassette Deck Controls and Operations, Playing Cassette Tapes, Record, Wind

CASSETTE DECK CONTROLS AND OPERATIONS

PUSH OPEN		PUSH OPEN
TAPE			TAPE
PLAY / REC	PLAY BACK

RECORD PLAY WIND STOP PAUSE HIGH SPEED DUB DUB PLAY WIND STOP PAUSE

GENERAL CONTROLS

RECORD

Press to enter Record mode from the radio, CD, TV, VCR 1 or VCR2•LD, and then press PLAY to start recording. You can only record on Deck 1.

PLAY

Press to play a tape.

NOTE: If no cassette is detected in a deck, the button will not work.

WIND

From stop mode, press to rewind the tape toward the beginning or to advance the tape toward the end.

STOP

Press to stop current tape activity.

NOTE: This system has an Automatic Stop Feature. When the tape deck is operating in any mode and reaches the end of the tape, it automatically shuts itself off.

PAUSE

Press to interrupt the Play or Record mode. Press PLAY to resume activity. If a deck is paused for more than three minutes it will automatically shut itself off.

PLAYING CASSETTE TAPES

You can play cassettes from either of the two tape deck

1.Press the Tape function button to activate the cassette deck. The Tape LED will light.

2.On the cassette compartment door, press and release where it says PUSH OPEN to open.

3.Insert a tape - exposed side down - into the compartment door and close it securely.

4.Press WIND (forward) or (reverse) to move tape to the desired starting point.

5.Press PLAY to begin playing the tape.

NOTE: Remote will only control tapes in deck 1.

14