6.TROUBLESHOOTING
The unit does not work.
Check that the battery is installed properly.
Check the charge of the batteries. Replace if it is weak.
The image does not appear in focus.
Bring the inspected object to the center of the image. Turning the eyepieces (6) adjust to achieve the clearest image on the screen. Then obtain the most
If the view still does not seem in focus, clean the lenses - they could be foggy or dusty.
CONTENTS
1- Overview
i)Application and Advantages
ii)Warning
iii)Precautions
2- Components
3- Specifications
4- Construction
5- Operating Instructions
5.1
5.2Operation at night
6- Troubleshooting
7- Warranty
8- Customer support
Unit flashes
It is normal for the unit to flash within the first 2 minutes of activation. If the flashing continues afterwards the following is a possible cause: bright environment (even with the caps closed!)
Condensation accumulates on the parts.
It is O.K. to use the unit in cold. However, when the unit is brought from the cold into a warm environment, it has to warm up for up to 2 hours (not minutes!).
Only then it is allowed to turn it ON again.
THANK YOU FOR PURCHASING THE NIGHT VISION
THE DEVICE FOR PROPER OPERATION WHEN BUYING IT. PLEASE READ ALL THE
INSTRUCTIONS CAREFULLY BEFORE USING.
1.OVERVIEW
The night vision
Some of the typical activities where the binoculars will be useful:
•Law enforcement
•Wildlife observation
•Security
•Search and rescue
•Hunting
•Photography (Dark room operation)