Features, Precautions | Newcon Optik NVS7-2/4xHD guide

Features

•Waterproof construction

•Built-in Infra Red illuminator allows observations in total darkness (i.e. basement, cave or dark room);

•Independently adjustable eyepieces;

•Lightweight and comfortable;

•Soft rubberized eye pieces makes the viewing more comfortable;

Warning!

After transportation or keeping the device at temperature lower than -25°C (-13°F), the device must be

warmed up to ambient temperature, from -25°C (-13°F) to +40°C (104°F), relative humidity of 80% max. at 20°C (68°F), for at least 2 hours.

Precautions

NVS7-2/4X /NVS7-2/4XHDis a sophisticated precision optical instrument equipped with electronics.

Therefore, it should be handled with due care.

•Keep your device away from direct sunlight, impacts, dust, moisture, and sudden changes of temperatures.

•Do not touch the optical surfaces with fingers. Doing so may damage the anti-reflection coating.

•Cleaning of optical surfaces is allowed only with professional camera lens cleaning supplies.

•To clean the exterior of the device, use only a soft clean cloth.

•Do not take the cover off the lens if not necessary.

•Keep away from heating appliances and central heating.

•Make sure to switch off the unit and remove the batteries during periods of non-operation and when storing the device for long period of time.

•Do not apply superfluous efforts at work with lens assembly, agile elements and thread connections.

•Due to considerable optical magnification of the eye-piece some small structures inside the tube coating in the form of dark and/or white points may be seen in the field of view which does not affect the serviceability of the device;

5.2 Operation at Night

Unscrew the lens covers from the lens. Turn on the device by turning the switch to the on position. In case of insufficient lighting when observing an object which is situated not far from the viewer, turn on the I/R illuminator by turning the switch to the next setting.

Note: The illuminator will be activated only if the unit has been already

switched on by switch.

Note: When looking directly in front of the binoculars operational illuminator appears as a red dot. The illuminator can be also detected using

night vision device. Therefore, if you need to remain undetected, use the

illuminator with caution.

If brightness of the screen is decreasing, replace the batteries. After operation the unit will automatically turn off after few minutes, till the complete discharge of the units power. Put protective lens caps on the lenses. This feature can be used to economically utilize the battery’s power by periodically switching on and off the device during operation. After operation remove the battery from the battery compartment to avoid any damage of the device in case of occasional leakage of electrolyte from the battery.