Newcon Optik NVS 15 operation manual Demist shield and sacrificial window

Page 16

5.11Installation of add-on lenses.

Always make sure that the goggles is switched off when you put on or take off the add-on lens.

FIGURE 4

NVS 15 Single unit with

attached 3x lens

Note: The following procedure is identical for 3x or 5x lenses (or any other add-on lenses).

Turn off the goggles. Remove the lens cap. Press the lens firmly towards the eyepiece. Do not apply excessive pressure. Make sure that the lens is fixed well on the goggles. To return the goggles back to 1x magnification, pull off the lens.

5.12Demist shield and sacrificial window

Note: Demist Shield and Sacrificial Window are optional.

Sacrificial window protects the objective lens from the abrasive influence of sand and dust in the night time. It should be put on the objective lens like an objective cap with the daylight filter.

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Night Vision Goggles Important Information Precautions Table of Contents Warranty Customer Support Acceptance Certificate Features Some typical activities where NVS 15 can be usefulOverview Page Optional accessories Delivery SETSpecifications Unit Design Installing battery Operation InstructionsSwitching the unit off Adjusting to individual visionFocusing Manual gain adjustmentUsing the unit with headgear or helmet Auto shut OFF at bright lightUsing IR illuminator Swinging head mounted unit for unobstructed viewDemist shield and sacrificial window Using the camera / video adapter Using the helmet mountLocking screw Mounting on a rifle NVS Unit with Picatinny adapterUsing with a daytime riflescope Binocular configuration BridgeTroubleshooting Image is unclearImage flashes Condensation accumulates on the partsWarranty What This Warranty Does Not CoverCustomer Support From all countriesThis page was intentionally left blank Acceptance Certificate NVS Newcon Optik
Top Page Image Contents