Newcon Optik NVS 15 operation manual Binocular configuration, Bridge

Page 21

5.17Binocular configuration

Two units can be combined into dual channel goggles/binoculars with the help of an optional bridge. Optional lens can be attached to form a binocular 3x system.

To form a double-unit system use the dovetail platform (10, Fig.1) located on both sides of the unit. These platforms are

identical.

The tightening screw (8, Fig. 1) locks goggles to the bridge. In this configuration the unit can be used in a goggle (mounted on a headgear) or handheld.

Figure 10. Bridge

FIGURE 11. Goggles	FIGURE 12. Binoculars
configuration	configuration

In the dual configuration the interpupillary distance can be adjusted between 58 and 72 mm right on a bridge.

18

Image 21

Contents Night Vision Goggles Important Information Precautions Table of Contents Warranty Customer Support Acceptance Certificate Some typical activities where NVS 15 can be useful FeaturesOverview Page Delivery SET Optional accessoriesSpecifications Unit Design Operation Instructions Installing batteryAdjusting to individual vision Switching the unit offManual gain adjustment FocusingAuto shut OFF at bright light Using the unit with headgear or helmetSwinging head mounted unit for unobstructed view Using IR illuminatorDemist shield and sacrificial window Using the helmet mount Using the camera / video adapterLocking screw NVS Unit with Picatinny adapter Mounting on a rifleUsing with a daytime riflescope Bridge Binocular configurationImage is unclear TroubleshootingImage flashes Condensation accumulates on the partsWhat This Warranty Does Not Cover WarrantyFrom all countries Customer SupportThis page was intentionally left blank Acceptance Certificate NVS Newcon Optik