Newcon Optik NVS 14-3GCS operation manual Binocular configuration, Bridge

Page 25

daytime scope with the help of an optional NVS Coupler.

6.17Binocular configuration

Two units can be combined into dual channel goggles/binoculars with the help of an optional bridge. Optional lens can be attached to form a binocular 3x system.

To form a double-unit system use the dovetail platform (10, Fig.1) located on both sides of the unit. These platforms are identical.

	The tightening screw (8, Fig. 1) locks
	monocular to the bridge. In this
	configuration the unit can be used in a
	goggle (mounted on a headgear) or
Figure 10. Bridge	handheld.
Figure 10. Bridge

FIGURE 11. Goggles	FIGURE 12. Binoculars
configuration	configuration

21

Image 25

Contents Night Vision Monocular / Goggles NVS 14-3GCS This page was intentionally left blank Important Information Precautions Table of Contents Warranty Customer Support Acceptance Certificate Features Some typical activities where NVS 14-3GCS can be usefulOverview Page Delivery SET Optional accessoriesNVS 14-3GCS SpecificationsUnit Design Image Intensifier Tube Specifications Main parameters Field of view cleanness Spatial frequency-contrast characteristics MTFOperation Instructions Installing batteryAdjusting to individual vision Switching the unit offManual gain adjustment FocusingAuto shut OFF at bright light Using the unit with headgear or helmetSwinging head mounted unit for unobstructed view Using IR illuminator Demist shield and sacrificial window Using the camera / video adapterUsing the helmet mount NVS 14- 3GCS with Picatinny Mounting on a rifleUsing with a daytime riflescope Bridge Binocular configurationPage Image is unclear TroubleshootingImage flashes Condensation accumulates on the partsWhat This Warranty Does Not Cover WarrantyCustomer Support Image Intensifier Tube serial number Acceptance CertificateNVS 14-3GCS Newcon Optik

Related manuals

Manual 32 pages 63.89 Kb