Newcon Optik NVS 14-3GCS operation manual Using the helmet mount, Helmet mount

6.14Using the helmet mount

The unit can be equipped with an optional helmet mount. This mount can be customized to fit a wide range of existing helmet models.

The mount is attached to a helmet with straps.

		1	2	3	4
FIGURE 6. Helmet mount
1.	Locking screw	3.	Flip-flop adjusting screws
2.	Flip/flop button	4.	Mount binding screw

The unit is fixed to the mount by the locking screw (1, Fig. 6). To adjust the position of the unit to your eye level use the screw (4, Fig. 6). To adjust the eye relief first loosen the locking screw (1, Fig.6) and set a comfortable distance between the eyes and the eyepiece; then tighten the locking screw back.

You can fixate the unit in three predetermined positions: vertical, horizontal, and 15-20 degrees above horizontal. Although the

18