Newcon Optik LRM1200, LRM1500SPD operation manual REc 1, rEc 2, …, rEc

Page 16

KMH/MPH: units of speed measurement: km/hour or miles/hour (3, Fig.3) (LRM 1500SPD only).

Shape of the reticle: cross shape or rectangular shape (2, Fig.3).

rEC1: Data Recall mode. It returns results of the last 10 measurements on the display.

Measurement results are saved in on-board memory. When you enter the Data Recall mode, first measurement set number (display name: rEc 1) will start flashing.

Pressing M button moves the unit along the list of measurement set numbers and measurement results:

rEc 1, rEc 2, …, rEc 0.

If distance was not measured, it will not appear in the list.

Measurement sets are numbered in reverse order: first recalled set is the result of the last measurement.

Pressing A button at any moment within the list of recalled results (or pressing M button at the end of the list) brings the unit to Ready to Measure mode.

Clr: clear data function: upon pressing the Action button (6) (fig.1) the entire data from all previous measurements will be erased.

13

Image 16
Contents LRM 1500SPD Laser Rangefinder Monocular Page Important Information Read prior to activationTable of Contents Brief Description Principle of operationKey Features Device Appearance Front viewPage Delivery SET Standard delivery setOptics SpecificationsRange Finder Power Speed Detector LRM 1500SPD onlyEnvironmental MechanicsOperation Instructions Changing battery To install a battery To take a battery outMeasuring procedure Maximum distanceMode selection REc 1, rEc 2, …, rEc Additional display information Storage and Maintenance Troubleshooting Black dots are visible on LCDWarranty What This Warranty Does Not CoverCustomer Support Quality Certificate LRM 1200 LRM 1500SPDPage Newcon Optik