Newcon Optik LRM1500SPD, LRM1200 operation manual Storage and Maintenance

Page 18

6. STORAGE AND MAINTENANCE

The unit is a sophisticated precision optical instrument equipped with laser and electronics. Therefore, it should be handled with due care.

Keep away from direct sunlight.

Avoid impacts, jolts, dust, moisture, and sharp changes of temperature.

Do not use the device at temperatures higher than 50oC (122oF).

Prevent unit from direct sunlight

Do not touch optical surfaces. Doing so may damage the anti-reflection coating.

Clean optical surfaces only with professional camera lens cleaning supplies.

Clean the exterior of the unit with a soft clean cloth.

Keep away from heating appliances and central heating.

Remove the battery when storing the device for long time.

All repair works must be performed only by an authorized service.

Prevent bright light from focussing through the eyepiece

15

Image 18
Contents LRM 1500SPD Laser Rangefinder Monocular Page Important Information Read prior to activationTable of Contents Brief Description Principle of operationKey Features Device Appearance Front viewPage Delivery SET Standard delivery setSpecifications OpticsRange Finder Environmental PowerSpeed Detector LRM 1500SPD only MechanicsOperation Instructions Changing battery To install a battery To take a battery outMeasuring procedure Maximum distanceMode selection REc 1, rEc 2, …, rEc Additional display information Storage and Maintenance Troubleshooting Black dots are visible on LCDWarranty What This Warranty Does Not CoverCustomer Support Quality Certificate LRM 1200 LRM 1500SPDPage Newcon Optik