2 . R a n g e F i n d e r |
|
Type | Class 1 eye safe, 905nm |
Measuring Range, m | |
Accuracy, m | ±1 ± 0.1% |
Resolution, m | 1 |
Measurement time, sec | <1 |
Meters/Yards display | Yes |
Last 10 readings recall | Yes |
Reticule shape ( + or □) | Optional |
Target quality indicator | Optional |
Scan Mode | Yes |
Speed Finder | LRB 7x50 SPD only |
3. M i s c e l l a n e o u s |
|
Battery | Standard 9v |
Battery capacity | >3000 |
'Low Battery' Indicator | Yes |
Covering | Rubberized |
Construction | Water resistant |
Tripod thread | 1/4"x20 |
Operational Temperature | |
Range | |
Storage Temperature Range | |
Shock, g | 5 – 500 |
Vibration, Hz | 210x150x80 |
Dimensions, mm | 1.300 |
Weight, kg |
|
-REC 0 will show instead of REC10
-If a position is empty then 4 dashes
-After REC 0 the demonstration will restart with REC 1, REC2, and so on
2)If the last measurement was that of speed, then the speed will show in
REC1; the distance of the vehicle will show in REC2 and so on.
3)The self test procedure was completed properly if:
-The square and cross reticle are flashing alternately
-The lightening power symbol, reticle , square, 7 segment numbers, KMH and MPH segments on the screen are visible.
Y/M – units of measurement: yards or meters (3).
KMH/MPH – units of speed measurement: km/hour or miles/hour
(3). Please note: only on LRB 7x50 SPD.
Shape of the reticle: cross shape or rectangular shape (2). Please
note: this is an optional feature.
rEC1 - recall function. Upon pressing the Action button (6) (fig.
1)the Display will sequentially show results of last 10 measurements, starting from the latest one. The number appearing after word "REC" shows the number of the measurement counted back in the sequence. When the System is in inactive state the 10 previous measurements are stored within the System and may be recalled any time.