Newcon Optik LRB 7X50 operation manual Trouble Shooting, Range measuring mode does not work

Page 4

BEFORE USE CAREFULLY READ ALL THE INSTRUCTIONS!

FAILURE TO OBEY THE INSTRUCTIONS WILL VOID

THE WARRANTY!

1. BRIEF DESCRIPTION

LRB 7X50 (SPD) Laser Range Finder Binocular is an advanced Laser Range Finder system that provides instant distance measurements consistently and accurately. The stereoscopic device provides convenient observation with both eyes. The user can measure the distance to an object without loosing sight of the target. Therefore, the LRB 7X50 (SPD) substitutes a need for two separate devices (binocular and range finder) combining both requirements in a single device.

The outstanding optics provide a sharp, clear image under all conditions. LRB 7X50 (SPD) is utilizing a revolutionary digital design, which is outperforming any other product in its class and price range.

The unit sends invisible, eye safe laser beam pulses to the target. The returned beams are captured by the digital circuitry. The time differential allows us to calculate the distance to the target.

7. TROUBLE SHOOTING

The range measuring mode does not work.

Press the Action Button again.

Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak.

How can I clear last reading before making next measurement? Direct the unit’s LCD reticle at the new target, press the Action button. The new reading will appear.

There are black dots in the image.

A LCD (Liquid Crystal Display) is installed in the optical channels of the device. Due to manufacturing imperfections in the production process of the LCD, small black dots, scratches and other blemishes might be visible. Those blemishes are strictly regulated for maximum allowed number, size and location. It does not degrade the product's performance.

Range measurement cannot be obtained.

Check if range detection mode is activated (message READY appears on the LCD display)

Check if Active Button is pressed

Make sure that neither your hand nor finger is blocking objective lenses (Laser emitting lens or Receiver lens).

Check if the unit is steady while pressing Action button.

Image 4
Contents LRB Important Information Customer SupportWarranty ContentsTrouble Shooting Range measuring mode does not workAppearance of the Device Supplied Accessories Reflection A n g e F i n d e r Operation Instructions Mode selection stateLiquid Crystal Display LCD Distance Measuring Procedure a. Measuring state Preparing the Device for Operation
Related manuals
Manual 10 pages 9.65 Kb