Newcon Optik LRB 7X50 SPD operation manual Reflection

Page 7

CL - clear data function: upon pressing the Action button (6) (fig. 1) the entire data on all previous measurements will be erased.

4. TECHNICAL CHARACTERISTICS

NOTE: After changing a battery the recall stack should be cleared by exercising the CL mode.

OVER 100 – allows to ignore targets closer than 100m. Useful when looking through bush.

Please note: this is an optional feature on early designs. Latest version includes automatic “Last Target” selection that renders obsolete the requirement for a separate manual mode selection.

c. Reflection

Distance measuring procedure includes instant statistical processing of the package of single measuring sessions. Qualitative result of the statistical processing is presented on the Display as a message TARGET REFLECTION (5).

There are four statistical qualifications of the reflected signal:

NO TARGET REFLECTION – when a reflected signal isn’t received. Numerical display shows 4 dashes in the distance displaying area;

TARGET REFLECTION LOW – when the number of steady received reflected signals is just enough to make acceptable conclusion about the distance;

1 . O p t i c s Observation Magnification, x Objective Lens, mm Exit Pupil Diameter, mm Eye Relief, mm

Field of View Axial Resolution, ” Image tilt, maximum

-Horizontal

-Vertical

Type of coating Interpupillary Distance, mm Diopter Adjustment range Reticule

Binocular

7

50

7.1

25

6

60”

30”

Fully multi-coated optics

58-72

±4

Corresponds to laser

direction and approx. size

of the laser on target

Image 7
Contents LRB Customer Support Important InformationContents WarrantyRange measuring mode does not work Trouble ShootingAppearance of the Device Supplied Accessories Reflection A n g e F i n d e r Operation Instructions Mode selection stateLiquid Crystal Display LCD Preparing the Device for Operation Distance Measuring Procedure a. Measuring state
Related manuals
Manual 10 pages 8.8 Kb