1
Patent pending
Newcon Optik
Made in Canada
9
10
1 – Eyepieces; 9 – Interpupilary distance adjustment lever
10- Identification Label (Located on the Bottom)
Fig. 2
3. SUPPLIED ACCESSORIES
LRB 7X50 is supplied in the following assembly:
- Device | 1 pc. |
- Carrying Case | 1 pc. |
- Neck Strap | 1 pc. |
- User’s manual | 1 pc. |
- Warranty card | 1 pc. |
- 9V battery (optional) | 1 pc. |
|
|
•TARGET REFLECTION MED - when the number of steady received reflected signals is in medium range and enough to make positive conclusion about the measured distance;
•TARGET REFLECTION HIGH - when the number of steady received reflected signals is qualified to be enough to make reliable conclusion about the measured distance.
The displayed statistical qualification of the reflected signal characterizes variation in expected accuracy of measurements. At qualification HIGH the accuracy of measurements is stated as
±1m or ± 0.1%. At lower rates of statistical qualification the expected accuracy may marginally degrade.
Please note: this is an optional feature.
The display presents message LOW BAT – when voltage of the primary
The System remains in the active displaying state for 10 seconds after pressing of any of the operating buttons and after 10 seconds enters the passive low power state.
Alkaline or lithium type of batteries capable to sustain current drain up to 150 ma should be used for powering the System.