Celestron C8-S, C5-S, C9.25-S instruction manual Utility Features

Page 27
CALIBRATE GOTO
HOME POSTION
GOTO
SET
POLAR ALIGN LIGHT CONTROL
KEYPAD OFF
KEYPAD ON
DISPLAY OFF
DISPLAY ON
FACTORY SETTING
PRESS UNDO PRESS "0"
VERSION GET ALT-AZ GOTO ATL-AZ HIBERNATE TURN ON/OFF GPS

telescopes azimuth in this position (by looking at Get Alt-Azunder the Utilities menu) you can determine the telescopes azimuth at its most extended position. Enter this azimuth reading for either the maximum or minimum azimuth slew limit to ensure that the telescope will not slew beyond this point.

Warning: In order for the telescope to be able to slew to a star from the direction that minimizes the amount of backlash in the gears, it may be necessary for the telescope to slew beyond the specified slew limit in order to approach the star from the correct direction. This can limit your ability to slew to an object by as much as 6º from the azimuth slew limit set in the hand control. If this proves to be a problem, the direction that the telescope takes to center an object can be changed. To change the telescopes slewing direction, see Goto Approach under the Scope Setup menu. In order to guaranty that the telescope will have a full range of motion in R.A. (azimuth), set the azimuth slew limits to 354 and 186. This will allow the mount to slew without regard to the slew limits.

East/West (E/W) Filtering - In order to ensure the best possible full sky pointing accuracy, the Advanced series telescopes automatically filters and chooses its initial alignment stars so that the first two alignment stars are located on one side of the Meridian and the third star is on the opposite side of the Meridian. East/West Filtering allows you to turn off this automatic filtering feature, allowing the hand control to display all of its alignment stars when doing a Auto Three Star Align, without regard to the Meridian.

Utility Features

Scrolling through the MENU (9) options will also provide access to several advanced utility functions within the Advanced Series telescopes such as; Calibrate Goto, Polar Alignment, Hibernate as well as many others.

Calibrate Goto - Goto Calibration is a useful tool when attaching heavy visual or photographic accessories to the telescope. Goto Calibration calculates the amount of distance and time it takes for the

mount to complete its final slow goto when slewing to an object. Changing the UTILITIES balance of the telescope can prolong the time it takes to complete the final slew. Goto

Calibration takes into account any slight imbalances and changes the final goto distance to compensate.

Home Position – The telescopes "home" position is a user-definable position that is used to store the telescope when not in use. The home position is useful when storing the telescope in a permanent observatory facility. By default the Home position is the same as the index position used when aligning the mount. To set the Home position for your mount simply use the arrow buttons on the hand control to move the telescope mount to the desired position. Select the Set option and press Enter.

Polar Align- The Advanced GT has a polar alignment function that will help you polar align your telescope for increased tracking precision and astrophotography. After performing an Auto Alignment, the telescope will slew to where Polaris should be. By using the equatorial head to center Polaris in the eyepiece, the mount will then be pointed towards the actual North Celestial Pole. Once Polar Align is complete, you must re-align your telescope again using any of the alignment methods described earlier. To polar align the mount in the Northern Hemisphere:

1. With the telescope set up and roughly positioned towards Polaris, align the mount using the Auto Align or Auto Three Star method.

2. Select Polar Align from the Utilities menu and press Enter.

Based on your current alignment, the telescope will slew to where it thinks Polaris

should be. Use the equatorial head latitude and azimuth adjustments to place Polaris in the center of the eyepiece. Do not use the direction buttons to position Polaris. Once Polaris is centered in the eyepiece press ENTER; the polar axis should then be pointed towards the North Celestial Pole.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Advanced Series Advanced Series GT Introduction Assembly Telescope Maintenance Page Advanced Series Autoguider Port Advanced C8-SGT ShownC9.25-S Setting up the TripodInstalling the Counterweight Bar Attaching the Equatorial MountAttaching the Center Leg Brace Attaching the Hand Control Holder Advanced GT Models Only Installing the CounterweightAttaching the Visual Back Attaching the Optical Tube to the MountEyepiece Installing the Star DiagonalInstalling the Eyepiece Installing the FinderscopeRemoving the Lens Cap Moving the Telescope ManuallyRear Cell Balancing The Mount in DEC Balancing The Mount in R.AAdjusting the Mount Adjusting the Mount in AltitudeAdjusting the Mount in Azimuth Attaching the Declination Cables For GT Models Only Powering the TelescopeAdvanced GT Hand Control Hand Control Operation Startup Procedure Alignment ProceduresAuto Three-Star Align Auto AlignQuick-Align Last AlignmentRe-Alignment Finding Planets Object CatalogSelecting an Object Slewing to an ObjectRate Button Tour ModeConstellation Tour Direction ButtonsSetup Procedures Identify Precise GoTo Observing Tip Helpful Hint Utility Features Helpful Hint Advanced GT Celestial Coordinate System Motion of the Stars Pointing at Polaris Latitude ScalesFinding the North Celestial Pole Declination Drift Method of Polar Alignment Observing the Sun Observing the MoonLunar Observing Hints Observing the PlanetsTransparency Solar Observing HintsObserving Deep Sky Objects Seeing ConditionsPage Short Exposure Prime Focus Photography Full Eyepiece ProjectionPlanet ISO Moon Mercury Venus Mars Jupiter Saturn Long Exposure Prime Focus PhotographyPage CCD Imaging Terrestrial PhotographyMetering Reducing VibrationAuto Guiding Collimation Care and Cleaning of the OpticsCollimated telescope Should appear Symmetrical with Page Page Page Appendix a Technical Specifications Appendix B Glossary of Terms Page Eclipsing or obscuring the brightness of the star Appendix C Longitudes Latitudes Georgia Minnesota Rhode Island Canada Communication Protocol Appendix D RS-232 ConnectionReset The Position Of Azm Or Alt Additional RS232 CommandsAppendix E Maps of Time Zones Page Page Page Page Page Page Page Celestron TWO Year Warranty
Related manuals
Manual 72 pages 50.01 Kb

C9.25-S, C5-S, C8-S specifications

Celestron, a leader in the field of amateur and professional astronomy, offers a range of telescopes ideal for both novices and experienced stargazers. Among their most celebrated models are the C8-S, C5-S, and C9.25-S, each designed with unique features and technologies that enhance the observational experience.

The Celestron C8-S is an iconic telescope known for its 8-inch aperture. This Schmidt-Cassegrain design combines a compact form factor with a powerful light-gathering capability, making it perfect for deep-sky observing. Its optical tube has a focal length of 2032mm, providing an excellent balance of wide field viewing and high magnification. The C8-S features Celestron's StarBright XLT optical coating, enhancing light transmission and contrast, ensuring that even faint objects are visible. With compatibility for various accessories and a sturdy mount, the C8-S stands as a versatile option for different observing styles.

Moving to the C5-S, this model boasts a 5-inch aperture while maintains a compact and portable design. It is particularly popular among travelers and casual astronomers who value convenience without compromising on quality. The C5-S also employs the Schmidt-Cassegrain design, providing sharp images and improved color correction. With its shorter focal length of 1250mm, the C5-S excels in both planetary and deep-sky observation. The telescope's lightweight build makes it easy to transport, while the integrated optical systems ensure a clear view of celestial objects.

The C9.25-S represents a step up in performance, featuring a 9.25-inch aperture that captures more light than its smaller counterparts. This telescope offers a versatile focal length of 2350mm, allowing for impressive high-power planetary views, as well as detailed observations of deep-sky objects. The C9.25-S utilizes a unique StarBright XLT coating and features advanced optics that minimize optical distortion, resulting in sharp, high-contrast images. It is equipped with a sturdy mount that ensures stability during extended observation sessions.

All three models are compatible with Celestron's advanced computer-driven mount systems, allowing for effortless tracking and alignment. With built-in features such as GoTo technology, users can easily locate thousands of celestial objects with the touch of a button. This combination of advanced optics, portability, and user-friendly technology makes the Celestron C8-S, C5-S, and C9.25-S excellent choices for anyone looking to explore the cosmos more deeply. Whether for casual stargazing or serious astronomical study, these telescopes deliver exceptional performance to meet a variety of needs.
Top Page Image Contents