Celestron C5-S, C8-S, C9.25-S Attaching the Optical Tube to the Mount, Attaching the Visual Back

Page 10
Declination
Index Marks
Figure 2-8

shafts, one on either side of the mount. It makes no difference which shaft you use since both work the same. Use whichever one you find more convenient. If, after a few observing sessions, you find the R.A. slow motion knob is more accessible from the other side, pull firmly to remove the knob, then install it on the opposite side.

5.The DEC slow motion knob attaches in the same manner as the R.A. knob. The shaft that the DEC slow motion knob fits over is toward the top of the mount, just below the telescope mounting platform. Once again, you have two shafts to choose from. Use the shaft that is pointing toward the ground. This makes it easy to reach while looking through the telescope, something which is quite important when you are observing.

Attaching the Optical Tube to the Mount

Advanced GT Users!

The telescope attaches to the mount via a dovetail slide bar which is mounted along the bottom of the telescope tube. Before you attach the optical tube, make

sure that the declination and right ascension clutch knobs are tight. This will ensure that the mount does not move suddenly

while attaching the telescope. To mount the telescope tube:

In order for the GT computerized mount to function properly, before installing the optical tube, the mounting platform must be positioned so that the Declination Index Marks are aligned (see Fig 2-8).

1.Loosen the mounting screw on the side of the telescope mounting platform. This allows you to slide the dovetail bar onto the mount.

2 Slide the dovetail bar on the telescope tube into the mounting platform of the

mount. Slide the telescope so that the back of the dovetail bar is close to the back of the mounting platform.

3Tighten the mounting screw on the side of the mounting platform to hold the telescope in place.

Now that the optical tube is securely in place, the visual accessories can now be attached to the telescope.

Dovetail Bar

Telescope

Mounting Screw

Figure 2-9

Attaching the Visual Back

The visual back is the accessory that allows you to attach all visual accessories to the telescope. The Advanced Series optical tubes come with the visual back installed. If it is not already on the tube it can be attached as follows:

1.Remove the rubber cover on the rear cell.

2.Place the knurled slip ring on the visual back over the threads on the rear cell (Fig 2-10).

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Advanced Series Advanced Series GT Introduction Assembly Telescope Maintenance Page Advanced Series Advanced C8-SGT Shown Autoguider PortSetting up the Tripod C9.25-SAttaching the Equatorial Mount Installing the Counterweight BarAttaching the Center Leg Brace Installing the Counterweight Attaching the Hand Control Holder Advanced GT Models OnlyAttaching the Optical Tube to the Mount Attaching the Visual BackInstalling the Finderscope Installing the Star DiagonalInstalling the Eyepiece EyepieceMoving the Telescope Manually Removing the Lens CapRear Cell Balancing The Mount in R.A Balancing The Mount in DECAdjusting the Mount in Altitude Adjusting the MountAdjusting the Mount in Azimuth Powering the Telescope Attaching the Declination Cables For GT Models OnlyAdvanced GT Hand Control Hand Control Operation Alignment Procedures Startup ProcedureAuto Align Auto Three-Star AlignLast Alignment Quick-AlignRe-Alignment Slewing to an Object Object CatalogSelecting an Object Finding PlanetsDirection Buttons Tour ModeConstellation Tour Rate ButtonSetup Procedures Identify Precise GoTo Observing Tip Helpful Hint Utility Features Helpful Hint Advanced GT Celestial Coordinate System Motion of the Stars Latitude Scales Pointing at PolarisFinding the North Celestial Pole Declination Drift Method of Polar Alignment Observing the Planets Observing the MoonLunar Observing Hints Observing the SunSeeing Conditions Solar Observing HintsObserving Deep Sky Objects TransparencyPage Short Exposure Prime Focus Photography Eyepiece Projection FullLong Exposure Prime Focus Photography Planet ISO Moon Mercury Venus Mars Jupiter SaturnPage Reducing Vibration Terrestrial PhotographyMetering CCD ImagingAuto Guiding Care and Cleaning of the Optics CollimationCollimated telescope Should appear Symmetrical with Page Page Page Appendix a Technical Specifications Appendix B Glossary of Terms Page Eclipsing or obscuring the brightness of the star Appendix C Longitudes Latitudes Georgia Minnesota Rhode Island Canada Appendix D RS-232 Connection Communication ProtocolAdditional RS232 Commands Reset The Position Of Azm Or AltAppendix E Maps of Time Zones Page Page Page Page Page Page Page Celestron TWO Year Warranty
Related manuals
Manual 72 pages 50.01 Kb

C9.25-S, C5-S, C8-S specifications

Celestron, a leader in the field of amateur and professional astronomy, offers a range of telescopes ideal for both novices and experienced stargazers. Among their most celebrated models are the C8-S, C5-S, and C9.25-S, each designed with unique features and technologies that enhance the observational experience.

The Celestron C8-S is an iconic telescope known for its 8-inch aperture. This Schmidt-Cassegrain design combines a compact form factor with a powerful light-gathering capability, making it perfect for deep-sky observing. Its optical tube has a focal length of 2032mm, providing an excellent balance of wide field viewing and high magnification. The C8-S features Celestron's StarBright XLT optical coating, enhancing light transmission and contrast, ensuring that even faint objects are visible. With compatibility for various accessories and a sturdy mount, the C8-S stands as a versatile option for different observing styles.

Moving to the C5-S, this model boasts a 5-inch aperture while maintains a compact and portable design. It is particularly popular among travelers and casual astronomers who value convenience without compromising on quality. The C5-S also employs the Schmidt-Cassegrain design, providing sharp images and improved color correction. With its shorter focal length of 1250mm, the C5-S excels in both planetary and deep-sky observation. The telescope's lightweight build makes it easy to transport, while the integrated optical systems ensure a clear view of celestial objects.

The C9.25-S represents a step up in performance, featuring a 9.25-inch aperture that captures more light than its smaller counterparts. This telescope offers a versatile focal length of 2350mm, allowing for impressive high-power planetary views, as well as detailed observations of deep-sky objects. The C9.25-S utilizes a unique StarBright XLT coating and features advanced optics that minimize optical distortion, resulting in sharp, high-contrast images. It is equipped with a sturdy mount that ensures stability during extended observation sessions.

All three models are compatible with Celestron's advanced computer-driven mount systems, allowing for effortless tracking and alignment. With built-in features such as GoTo technology, users can easily locate thousands of celestial objects with the touch of a button. This combination of advanced optics, portability, and user-friendly technology makes the Celestron C8-S, C5-S, and C9.25-S excellent choices for anyone looking to explore the cosmos more deeply. Whether for casual stargazing or serious astronomical study, these telescopes deliver exceptional performance to meet a variety of needs.
Top Page Image Contents