Weapon Mount Optional, Camera Adapter Optional

ADJUSTING

1)Loosen the tightening knob [2] on the rail to enable you to easily slide the unit on. Don’t retighten the knob yet.

2)Loosen the top horizontal fixation knob

[3]. Adjust goggle horizontal position. Tighten horizontal fixation knob.

3)Loosen the side vertical fixation knob [4]. Adjust goggle vertical position. Tighten vertical fixation knob.

NOTE: The helmet mount has the addi- tional ability for vertical adjustment. You can displace the rail to another vertical position if need be [ 5].

	2
5	1

4)Adjust Eye Relief by sliding the PS-14 on the rail toward or away from eyes. Then tighten the fixation knob [2] on the rail.

5)Goggles can be flipped up when not in use. Loosen the side vertical fixation knob [4]. Upright the unit and fix in this position with fixation knob.

WEAPON MOUNT (OPTIONAL)

Weapon mount adapter allow the system to be mounted on the M16/M4 Picatinny style rail.

1)Install the Picatinny weapon mount adapter [1] on to the rail.

2)Mount the cleat [2] to body of PS-14.

3)Push the fixation lever [3] and move PS-14 ahead to the slot of weapon adapter [4] until fixa- tion .

4 3

CAMERA ADAPTER (OPTIONAL)

To use your PS-14 with a 35mm camera or camcorder you will need the following:

1)If you plan to use a camcorder then your camcorder must have a MACRO feature. Most modern camcorders today have a MACRO feature built-in.

2)If you plan to use a 35mm camera, you will need a MACRO lens. If you don’t have one, we advise that you contact your local camera store.

3)You may or may not need a STEP-UP or STEP-DOWN ring in order to adapt the camera adapter to your lens. NOTE: The camera adapter comes with 37mm and 52mm threads. If you need other sizes your local camera store should be able to help.