USING THE CAMERA ADAPTER (OPTIONAL)
To use your Night Shadow with a
1)If you plan to use a camcorder then camcorder must have a MACRO feature. Most modern camcorders today have a MACRO feature built in.
2)If you plan to use a
3)You may or may not need a
NOTE: The camera adapter comes with
•Remove the rubber eyecup from the Night Shadow
•Screw the camera adapter onto the front of the lens on your Video camera lens or your
•Loosen the three set screws on the camera adapter.
•Place the camera adapter over the Night Shadow eyepiece.
•Tighten the three set screws to fit snugly to the Night Shadow eyepiece
•You may need to focus the
•We suggest that you find an open space to work in. Focus the init so that the scene is at its sharpest. For the best results you should disable the auto focus (if any) on either the
*An important part to remember is that you are not taking a picture of the object that is far away from you, but you are actually taking a picture of the phosphorous screen of the Night Shadow that is only
Screw
nt ring
Camera adapter
4