ATN ATN NVM14 manual Preventive Maintenance Checks and Services for ATN NVM-14

Page 46

6-4

TABLE 6.1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR ATN NVM-14 (CONT.)

Item Interval No.

Location Item to Procedure Check/Service

Not Fully Mission

Capable If

10.Before/After

11.Before/After

12.Before/After

Viewed Image

Strap Pads

Socket

Refer to Section V – Operation Defects

– to inspect for operational defects.

Inspect for cuts, tears, fraying, holes, cracks, or defective fasteners.

Inspect for dirt, dust, or corrosion. Insert ATN NVM-14 latch into socket to verify secure attachment of ATN NVM- 14 to headmount. If necessary, clean socket with water.

Flickering, flashing, edge glow, or shading is observed.

Damage causes straps or pads to be unserv- iceable.

Damaged, latch won’t work or too loose.

13.

13.

For and Aft Adjustments

For and Aft Adjustments

Press the socket-release button and check for free motion. Inspect for damage.

Press the socket-release button and check for free motion. Inspect for damage.

Binding, damaged or non-operational slide mechanism.

Binding, damaged or non-operational slide mechanism.

Image 46

Contents ATN NVM14 American Technologies Network CorpManual NVM14-002 Revision 3 July Safety Summary Page Equipment Limitations Table of Contents List of Figures List of Tables Table TitleUsage HOW to USE this ManualManual Overview Page General Information Helmet Mounted Day Multi-Use Minimonocular General Information Purpose of EquipmentTechnical Information Warranty InformationList of Abbreviations Equipment Description System Description WEIGHT, DIMENSIONS, and Performance PerfomanceDescription of Major Components DNS ATN NVM-14 Major ComponentsKit Components ATN NVM-14DNS Major ComponentsOptional Components Eye-cup Multi-Use MinimonocularLens Cap Soft Carrying CaseBattery AA Alkaline Headmount AssemblyLens Tissue Battery 123A LithiumOptional Components Camera/Camcorder AdapterMounting Procedures Mounting the ATN NVM-14 to the Weapon Mounting ProceduresAttaching Weapon Mount to Weapon Attaching ATN NVM-14 to Weapon Mount Mounting the ATN NVM-14 to a HEAD/ Helmet Mount Attaching ATN NVM-14to Headmount AdapterAttaching ATN NVM-14to Head/Helmet Mount Page Operating Procedures Battery Life Battery InstallationOperating Instructions Install DL 123 batteries as follows DL123 Battery InstallationInstall standard AA batteries as follows Dnaas Battery InstallationMechanical Functions Mechanical FunctionsInfrared IR Illuminator Operations Zeroing Operational Defects Shading Zeroing Operational DefectsShading Mode Selector SwitchEdge Glow Edge GlowCosmetic Blemishes FLASHING, FLICKERING, or Intermittent OperationBright Spots Emission Points Bright Spots and Emission Points Black SpotsFixed-Pattern Noise Fixed Pattern NoiseChicken Wire Page Maintenance Preventive Maintenance Preventive Maintenance Checks and Services for ATN NVM-14Preventive Maintenance Checks and Services for ATN NVM-14 Preventive Maintenance Checks and Services for ATN NVM-14 Not Fully Mission Capable If Or damaged clips Operator Troubleshooting Operator Troubleshooting for ATN NVM-14 Malfunction Test or inspection Headmount Maintenance Cleaning the ATN NVM-14Browpad Replacement Neckpad Reinstallation Neckpad ReinstallationLacing the Sliding BAR Buckle Lacing the Sliding Bar BucklePage END Item Components Table A-1 ATN NVM-14 END Item ComponennentsRepair Parts List Table B-1 ATN NVM-14 Repair Parts ListIndex IND-2 ATNNVM14-3 For Technical InformationATN Corp Info@atncorp.comINFO-2 North American Office