ATN ATN NVM14 manual Mounting Procedures, Mounting the ATN NVM-14 to the Weapon

Page 24

3.1 MOUNTING PROCEDURES

CAUTION

It is recommended that the eyecup be replaced with the eyeguard during weapon-mounted use.

NOTE

The ATN NVM-14 is not a weapon sight, however, it can be used in conjunction with a collimated dot sight or laser aiming device.

A. MOUNTING THE ATN NVM-14 TO THE WEAPON

To mount the ATN NVM-14 perform the following:

1.Loosen the clamping knob on the weapon mount. Position the monocular mount on the weapon’s mounting rail, adjust the fore/aft position of the monocular as necessary by loosening the clamping knob and repositioning the weapon mount on the rail. Tighten by turning the clamping knob (see figure 3-1).

Figure 3-1

Attaching Weapon Mount to Weapon

3-2

Image 24

Contents ATN NVM14 American Technologies Network CorpManual NVM14-002 Revision 3 July Safety Summary Page Equipment Limitations Table of Contents List of Figures List of Tables Table TitleHOW to USE this Manual UsageManual Overview Page General Information Helmet Mounted Day Multi-Use Minimonocular General Information Purpose of EquipmentWarranty Information Technical InformationList of Abbreviations Equipment Description System Description WEIGHT, DIMENSIONS, and Performance PerfomanceDescription of Major Components DNS ATN NVM-14 Major ComponentsATN NVM-14DNS Major Components Kit ComponentsOptional Components Multi-Use Minimonocular Lens CapEye-cup Soft Carrying CaseHeadmount Assembly Lens TissueBattery AA Alkaline Battery 123A LithiumOptional Components Camera/Camcorder AdapterMounting Procedures Mounting Procedures Mounting the ATN NVM-14 to the WeaponAttaching Weapon Mount to Weapon Attaching ATN NVM-14 to Weapon Mount Mounting the ATN NVM-14 to a HEAD/ Helmet Mount Attaching ATN NVM-14to Headmount AdapterAttaching ATN NVM-14to Head/Helmet Mount Page Operating Procedures Battery Installation Battery LifeOperating Instructions Install DL 123 batteries as follows DL123 Battery InstallationInstall standard AA batteries as follows Dnaas Battery InstallationMechanical Functions Mechanical FunctionsInfrared IR Illuminator Operations Zeroing Operational Defects Zeroing Operational Defects ShadingShading Mode Selector SwitchEdge Glow Edge GlowFLASHING, FLICKERING, or Intermittent Operation Cosmetic BlemishesBright Spots Emission Points Bright Spots and Emission Points Black SpotsFixed-Pattern Noise Fixed Pattern NoiseChicken Wire Page Maintenance Preventive Maintenance Preventive Maintenance Checks and Services for ATN NVM-14Preventive Maintenance Checks and Services for ATN NVM-14 Preventive Maintenance Checks and Services for ATN NVM-14 Not Fully Mission Capable If Or damaged clips Operator Troubleshooting Operator Troubleshooting for ATN NVM-14 Malfunction Test or inspection Cleaning the ATN NVM-14 Headmount MaintenanceBrowpad Replacement Neckpad Reinstallation Neckpad ReinstallationLacing the Sliding BAR Buckle Lacing the Sliding Bar BucklePage END Item Components Table A-1 ATN NVM-14 END Item ComponennentsRepair Parts List Table B-1 ATN NVM-14 Repair Parts ListIndex IND-2 For Technical Information ATN CorpATNNVM14-3 Info@atncorp.comINFO-2 North American Office