ATN MK 6600 manual Windage and Elevation, Using the Remote Control, Range Finder

Page 7

WINDAGE AND ELEVATION

To adjust vertical and horizontal positions for the Aries MK6600/6650/7700/7750/8700/8750 turn the elevation and windage adjustment mechanisms. Each click equals to 1/8 inch at 100 yards. Do not use force having reached the maximum of rotation.

WindageElevation

USING THE REMOTE CONTROL

Below the control box you can find the panel with two screws to fix Aries MK6600/6650/7700/7750/8700/ 8750.

To plug in the remote control, remove the screws and the small panel to disclose the inlet.

The three remote control buttons’ function similarly to control box buttons. Once the remote control is plugged in you may use both panels to adjust the scope.

The remote control can be attached to the weapon of your choice through whatever means best suiting your shoot- ing style and grip. We suggest an elastic Velcro® loop

fastener similar to the trigger switches found on the weapon mounted laser pointers.

RANGE FINDER

The range finder reticle in your Aries MK6600/7700/ 8700 has been designed to assist you in determining the range of your target. These distances are based on a 6’ target. A 6’ target fits between the numbered baseline (the three short horizontal lines just next to the numbers) and the main horizontal line. If the 6’ target fits between the 1 and the right horizontal posts of the main line the target is 100 yards away. If the same target fits between the 2 and the right post of the main line the target is 200 yards away. The same is with the three, the target is 300 yards away.

If the “Red on Green” reticule is not perpendicular to the bore of the rifle, it can be adjusted by doing the following:

1.Unscrew the cover between the windage and eleva- tion adjustments.

2.Loosen the flat-head screw about 1/2 - 3/4 of a turn.

3.Rotate the central threaded shaft with two notches as needed (make sure that you do not rotate the round plate mounted on this shaft individually. They will rotate together, but if you move the plate itself, if will interfere with the focus of the reticule).

If a 6` target fits between these two lines then the target is 300 yards away

3

2

1

If a 6` target fits between these two lines then the target is 100 yards away

3 2 1

6

Image 7
Contents Aries MK 6600/6650 Aries MK 7700/7750 Aries MK 8700/8750 Aries MK6600/7700/8700 Application Master Power SwitchControl Panel Reticle Brightness Adjustment Light Intensifier Tube Brightness AdjustmentINFRA-RED Illumination Proximity Sensor Sleep ModeMounting the Aries MK6600/6650/7700/7750/8700/8750 FocusingWindage and Elevation Using the Remote ControlRange Finder Reticle Patterns Preparation for OperationTrouble Shooting Cleaning the EyepieceSpecification FeaturesLimitation of Liability Year Product WarrantyProduct Warranty Registration Obtaining Warranty ServiceEuropean Office