Sharp HTSB350 Connecting to a TV Digital connection, Connecting a digital tuner, etc

Sound bar

Note:

When connecting with an optical digital cable, set the digital output of the digital tuner to PCM. Refer to the operation manual of the digital tuner.

To optical

digital audio

output socket

Sound bar connections to TVs (continued)

■Connecting to a TV

Digital connection:

Connect to the TV using an optical digital audio cable or a coaxial digital audio cable.

TV

Coaxial digital
audio cable
(commercially signal
available)	Audio
To COAXIAL
input socket

Audio signal

To optical

digital audio

output socket

Optical digital

audio cable

(commercially

available) To OPTICAL input socket

Sound bar

TV	To audio output
	RCA cable	jacks
To headphone	(supplied)	To LINE IN
jack	Sound
Audio cable	bar	1 jacks
(not supplied)
To AUDIO
LINE IN 2
jack

■Connecting a digital tuner, etc.

Connect to the digital tuner, etc. using an optical digital audio cable or a coaxial digital audio cable.

To select DIGITAL 1 (coaxial input) or DIGITAL

2 (optical input) function:

● On the unit: Press FUNCTION button repeat- edly until “d1” or “d2” is displayed.

● On remote control: Press DIGITAL 1 or DIGITAL 2 button and “d1” or “d2” is displayed.

Analog connection:

If theTV/monitor has an audio output, connect it to the LINE IN 1 or LINE IN 2 jacks on the rear of the unit.

To select LINE IN 1 or LINE IN 2 function:

● On the unit: Press FUNCTION button repeat- edly until “L1” or “L2” is displayed.

● On remote control: Press LINE button repeat- edly until “L1” or “L2” is displayed.

Notes:

● If the TV volume is continuously in low level, the unit will automatically power off. Increase the TV output volume to enjoy the sound from the speaker.

● If the speaker volume is continuously in very high level, the unit will mute and recover after 3 seconds.

To select DIGITAL 1 (coaxial input) or DIGITAL

2 (optical input) function:

● On the unit: Press FUNCTION button repeat- edly until “d1” or “d2” is displayed.

● On remote control: Press DIGITAL 1 or DIGITAL 2 button and “d1” or “d2” is displayed.

To coaxial digital audio output socket

To the TV (video)
Coaxial digital
audio cable		Audio	Optical digital
(commerciallysignal			audio cable
available)	Audio	signal	(commercially
			available)
To COAXIAL
			To OPTICAL
input socket			input socket

E-