14With the hopper lying on its side, take one full extension leg section and slide it into the square stub leg that you have already installed
on the hopper (Illustration J).
15Repeat step #14 for the remaining two extension leg sections.
16Once all extension leg sections are installed into the stub legs, locate a second person
to help raise the unit. One person must hold onto one of the extension leg sections while the other person raises the unit, using the other two extension leg sections for leverage. Be careful while
(Illustration J)
you are lifting this unit into place as not to allow the extension leg kit sections to come undone.
17Once complete, refer to directional product information guide for installation
instructions.
Once again, thank you for your purchase!
PAge 8