Cannon DIGI-TROLL 5 TS owner manual Your Boats Electrical Condition, Connecting to the Battery

Page 16

Installation

16

Wiring Your Downrigger

Your Boat's Electrical Condition

It is important to make sure that your boat is properly set up before installing your Digi-Troll with Positive Ion Control (PIC). Whenever a boat is in water, various submerged parts interact to create weak electrical currents. These weak electrical currents must be controlled to extend the life of the boat's metal parts and ensure a good fish catching environment.

Check the zinc sacrificial anodes on your boat and on the outboard/outdrive. If they are more than 50% dis- solved they should be replaced. Any coating of slime or growth should be cleaned off. All metal parts including the hull (if metal) must be interconnected by a grounding wire. This includes motor shafts, outdrives, and through hull fittings. If your boat and zinc anodes are set up correctly, the voltage on the stainless steel downrigger wire should be positive when in contact with the water.

With your boat in the water and the downrigger cable deployed in the water, measure the dc voltage from the cable to a grounded metal surface of the boat touching the water. It should be 0.6-0.8VDC (fixed PIC) or it should match your Digi-Troll setting if properly wired.

•The use of Cannon vinyl coated lead weights is recommended.

•Use the trolling weight insulators supplied with your downrigger. This insulates your weight from the positive charge on the cable. This will also ensure that the trolling weight will stop at water level when retrieved.

•The cable on your downrigger should be replaced every 2 years. Etching of the cable can weaken it physically and electrically.

•In saltwater, make sure the sacrificial zinc anodes are replaced when half dissolved. This ensures that the boat will run with a neutral or slightly positive charge. Clean zincs on a regular basis with a non-corrosive brush.

•Always make sure the boat is properly grounded to the water. This will help ensure proper PIC voltage on the cable and that the Short Stop will function properly.

NOTE: To ensure proper operation of your Digi-Troll, ground the battery to your boat’s electrical system’s ground. Malfunctions with the PIC, communication between units, or loss of operation result from faulty grounding. Always check to see if your boat is properly grounded first.

Electrical Specifications & Wiring Instructions

The Digi-Troll is rated at 30 amps (full load), 12 volts DC and is protected by a 25 amp manual reset circuit breaker (located under motor housing). Be sure to measure the battery voltage of your boat.

WARNING! - DO NOT RUN THIS DOWNRIGGER ON A 24 VOLT BATTERY SYSTEM. THIS WILL DAMAGE THE UNIT AND VOID YOUR WARRANTY.

Connecting to the Battery:

It is strongly recommended that a fuse or manual reset circuit breaker be installed at the battery on the positive lead of the power cable or that you connect the downrigger to a battery selector switch. (See Fuse and Wire Speci- fications) Connect the positive lead (RED) to the (+) post on your battery and the negative lead (BLACK) to the (-) post on your battery or the downrigger will not operate. Use the quick disconnect plug to remove the downrigger without touching the battery.

NOTE: It is strongly recommended to power your Digi-Troll with a Deep-Cycle marine battery. Only run a Digi-Troll from a Starter battery if it is recharged by an alternator while trolling.

www.cannondownriggers.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DIGI-TROLL 5 DIGI-TROLL 5 TS Table of Contents Warranty and Registration Safety and CautionsIntroduction Overview Cannon Limited Warranty Reel BoomSwivel Head CableDownrigger Mounting on Boats Installing the Base on Your Boat Decks up to 7/16 thickDecks thicker than 7/16 Decks thinner than 1/4 Low-Profile Swivel BaseInstalling the Boom and Ball Hook Telescopic Boom only Boom END Pulley Telescopic BoomRemovable Spool Cover Removing or replacing the spoolReplacing the Clutch PAD Attaching the ROD HoldersTerminating the Downrigger Cable Using Your DIGI-TROLL with the Intellitroll Accessory Using the Included Power Loss Manual Crank Handle Connecting to the Battery Electrical Specifications & Wiring InstructionsYour Boats Electrical Condition Fuse / Breaker Specifications Powering Multiple DownriggersTypical Operating Time Red + Black Connect Multiple Batteries in ParallelDigi-Troll 5 Display Operating the Digi-TrollLCD Icon Layout Menu DownWater Zero Auto UPProgramming the Digi-Troll Menu SystemDownrigger when connected to Cannonlink Digi-Troll Factory Settings Un/Coated MenuOptional Intellitroll Accessory Networking your Digi-TrollsCable Terminator Weight Insulator Fishing With Your DownriggerManual Descent Positive Ion Control SystemUsing Positive Ion Control There are no user serviceable parts internal toDigi-Troll. Your warranty will be void if opened by Anyone other than an authorized or factory serviceMPH Consider special knots and swivels. a good ball Ten Good Trolling TipsConsider releases for flatline trolling. a good tip Problem TroubleshootingSolution This page Intentionally Left Blank Digi-Troll List Parts Digi-Troll 5 TS 32 9100070 CON Leader Sleeve Digi-Troll 5 Series Wiring Diagram Page Environmental Compliance Statement

DIGI-TROLL 5, DIGI-TROLL 5 TS specifications

The Cannon DIGI-TROLL 5 TS and DIGI-TROLL 5 are sophisticated trolling motor controllers that represent a leap forward in fishing technology. Designed for the angler who demands precision, efficiency, and ease of use, these devices offer a suite of features that enhance the fishing experience.

A standout feature of both models is the integrated digital depth counter, which provides real-time readings of the depth at which the bait is deployed. This valuable information allows anglers to optimize their lure presentation and accurately target specific species. The ability to monitor depth digitally eliminates the guesswork and ensures that the bait is presented where the fish are most likely to be.

The DIGI-TROLL series also boasts advanced line counter technology, enabling users to track how much line has been let out. This feature is particularly beneficial when trolling multiple lines, as it helps maintain consistent bait depth and spacing. The precise line counter enhances productivity by reducing tangles and ensuring that each line is effectively set at the desired depth.

Another significant characteristic is the dual-speed control that both models offer. This allows users to customize the speed of their downrigger, giving anglers the versatility to adapt to changing conditions or particular fish behavior. The DIGI-TROLL 5 TS takes this a step further with a feature for auto-stop, which helps prevent overrun and provides added convenience when adjusting settings.

Furthermore, both the DIGI-TROLL 5 TS and DIGI-TROLL 5 come with intuitive, user-friendly interfaces. Backlit LCD displays make it easy to read information even in low-light conditions, which is vital during early morning or late evening fishing trips. The buttons are strategically placed for quick adjustments, ensuring that anglers can focus on catching fish rather than fiddling with complex settings.

Durability is another hallmark of the DIGI-TROLL series. Built to withstand the rigors of the marine environment, these devices feature corrosion-resistant materials that ensure longevity even under harsh conditions. The Cannon DIGI-TROLL 5 TS and DIGI-TROLL 5 are not just tools, but reliable companions that enhance every fishing outing.

Whether you are a seasoned pro or a weekend warrior, the Cannon DIGI-TROLL 5 TS and DIGI-TROLL 5 offer essential features and robust technology to elevate your fishing game. With these innovative trolling motor controllers, the path to a successful day on the water is clearer and more efficient than ever before.
Top Page Image Contents