Cannon 5, 10TS owner manual Blowback Charts

Page 12

Blowback

Blowback

Simply stated, blowback is what happens to the downrigger weight when you pull it through the water behind your boat. As your speed increases, so does the horizontal distance between the weight and your downrigger. The faster you go, the farther the weight is behind you. The farther the weight is behind you, the shallower the weight is.

The following charts provide you with blowback information for three sizes of Cannon downrigger weights pulled at three different speeds with no lures attached and with no current. Current drag, water salinity and the use of non- Cannon products will affect your actual trolling depth.

As an example, the first chart shows that if you are trolling at 4 MPH with an 8 pound weight and you have 100 FT. of cable in the water with no current; the downrigger ball is actually at a depth of about 80 FT.

Blowback Charts

 

8-Lb. Weight at 2, 4, and 6 MPH

Actual

2 MPH

4 MPH

Depth

6 MPH

of Weight (ft.)

 

 

Amount of Cable in Water (ft.)

 

10-Lb. Weight at 2, 4, and 6 MPH

 

2 MPH

ActualDepth

4 MPH

6 MPH

of Weight (ft.)

 

 

Amount of Cable in Water (ft.)

 

12-Lb. Weight at 2, 4, and 6 MPH

ActualDepth

2 MPH

6 MPH

 

4 MPH

of Weight (ft.)

 

12

Amount of Cable in Water (ft.)

Image 12
Contents Uni-troll 10ts Parts Description BoomMounting Accessories Downrigger Mounting on BoatsSide Rail Mounting Pedestal MountingInstalling the Base on Your Boat Decks up to 7/16 thickDecks thicker than 7/16 Mounting the Downrigger on the Base Decks thinner than 1/4For Uni-Troll 10 and Uni-Troll 10 TS Setting Up Your Downrigger Attaching the BoomAttaching the Crank Handle Assembly Terminating the Downrigger Cable Cannon Uni-ReleaseAttaching the Rod Holder Lowering the Weight Raising the WeightAdjusting the Clutch Tension Operating Your DownriggerBlowback Charts BlowbackTrouble Shooting Adjusting the Depth MeterMaintaining Your Downrigger Ten Good Trolling Tips Cannon Limited Warranty Authorized Service Centers CentersUNI-TROLL 10 TM Decal NOSE, UNI-TROLL UNI-TROLL 10 Metric TM Spring Base Latch UNI-TROLL 10 TS TM Frame UNI-TROLL, White Decal NOSE, UNI-TROLL UNI-TROLL 10 TS/E TM Frame UNI-TROLL, White Decal NOSE, UNI-TROLL UNI-TROLL 5 TM Boom END UNI-TROLL 5 Metric TM Boom END