Cannon 5, 10TS owner manual Parts Description, Boom

Page 2

Introduction to downriggers

Introduction to Controlled Depth Fishing Undoubtedly there are many fishermen

familiar with the methods and use of controlled depth fishing. During the mid 1960's the state of Michigan introduced Pacific salmon into the Great lakes in an attempt to revitalize its sport fishing industry. From this successful transplant, new fishing techniques and equipment were developed. One such method was controlled depth fishing which enabled fishermen to place a lure at a desired depth by utilizing downriggers.

Because of the varying factors (water temperature, thermocline, weather, tides, time of day, or time of year) it is necessary for successful fishing to maintain specific water depths that coincide with fish movements and feeding patterns.

One essential feature of the downrigger is the depth meter or gauge that indicates lure depth. This allows the angler to control as well as return to specific depths where fish have been caught.

Due to the success of controlled depth fishing, downriggers are now being used throughout the world to catch a wide variety of species in both fresh and salt water. Whether fishing for blues off Rhode Island, walleyes in Lake Erie, sailfish off the coast of Florida, or stripers in Tennessee, the use of downriggers will make your fishing more successful and more enjoyable.

Attach Line Release to Rear Hook on Weight

Parts Description

1.

Reel

This is used to spool the cable, available in lengths ranging from 150 to 400 feet.

2.

Boom

This is used to extend the weight out from the body of the downrigger and has a pulley fixed

 

 

to its end. Boom lengths range from 24 to 53 inches.

3.

Swivel Head

This relays the cable at the end of the boom to lower the weight.

4.

Weight

This is used to maintain the depth at which you want to fish. Sizes of weights range from 4 to

 

 

20 lbs.

5.

Cable

This connects to the weight. Cable material is 150 lb. test stainless steel cable.

6.Depth Meter This determines how much cable you have run out, enabling you to choose your trolling depth.

7.Mounting Base This attaches to the boat, enabling you to place the downrigger where you choose.

8.Rod Holder This holds your fishing rods while trolling and may also be used for storing rods.

2

Image 2
Contents Uni-troll 10ts Parts Description BoomMounting Accessories Downrigger Mounting on BoatsSide Rail Mounting Pedestal MountingDecks thicker than 7/16 Installing the Base on Your BoatDecks up to 7/16 thick For Uni-Troll 10 and Uni-Troll 10 TS Mounting the Downrigger on the BaseDecks thinner than 1/4 Setting Up Your Downrigger Attaching the BoomAttaching the Crank Handle Assembly Terminating the Downrigger Cable Cannon Uni-ReleaseAttaching the Rod Holder Adjusting the Clutch Tension Lowering the WeightRaising the Weight Operating Your DownriggerBlowback Charts BlowbackMaintaining Your Downrigger Trouble ShootingAdjusting the Depth Meter Ten Good Trolling Tips Cannon Limited Warranty Authorized Service Centers CentersUNI-TROLL 10 TM Decal NOSE, UNI-TROLL UNI-TROLL 10 Metric TM Spring Base Latch UNI-TROLL 10 TS TM Frame UNI-TROLL, White Decal NOSE, UNI-TROLL UNI-TROLL 10 TS/E TM Frame UNI-TROLL, White Decal NOSE, UNI-TROLL UNI-TROLL 5 TM Boom END UNI-TROLL 5 Metric TM Boom END