Assembly

set-the treadmill in a cleared area and remove the packing materials, Make sure that all parts are

included before disposing of the packing materials. Please read each step carefully before

beginning.

1.Raise the Upright Post (13) to a vertical position. Insert the Lock Knob (25), with the Lock Knob Washer (24), into the Upright Post, and turn the Knob clockwise until almost tight. Leave a little play in the Upright Post for the following steps,

2.Slide the upper end of the Side Rail (79) into the opening in the left side of the Console (1). Insert the Short Side Rail Bolt (76) through the metal plate under the Console, and tighten the Bolt into the Side RaiL. Note: tf the Side Rail cannot be inserted into the Console far enough to attach the Bolt, roll back the Side Rail Foam Grip (78) slightlY.

3.Align the hole in the lower end of the Side Rail (79) with the hole in the Frame (40). Insert the Long Side Rail Bolt (11) through the Side Rail and Frame. Reach under the Frame and thread the Side Rail Nut (t4) onto the end of the Bolt. Tighten the Lock Knob (se@ step 1).

Make sure that all pards a_e tightened securely before using the treadmill.

78//1