Stamina Products 45-1002B owner manual Attach the Bumper STANDS22 to the bottom of the Base FRAME1

Page 7

ASSEMBLY INSTRUCTIONS

STEP 3: Place the BASE FRAME(1) between the LEFT and RIGHT UPRIGHTS(2, 3) and secure with HEX BOLTS(M12 x 70mm)(39)and WASHERS(M12)(48). DO NOT TIGHTEN COMPLETELY.

STEP 4: Secure the U-SHAPED HANDRAIL(5) onto the LEFT and RIGHT UPRIGHTS(2, 3) with BUTTON HEAD BOLTS(6mm x 15mm)(40) and ARC WASHERS(M6)(44). Connect the UPPER EXTENSION WIRE(28) to the LOWER EXTENSION WIRE(29).

STEP 5: Go back and tighten HEX BOLTS(M12 x 70mm)(39) in STEP 2. Conne ct the LOWER EXTENSION WIRE(29) located on the LEFT UPRIGHT(2) to the SENSOR WIRE(30). In sert the PULL PIN(9) through theRIGHT UPRIGHT(3) and BASE FRAME(1) to lock theBASE FRAME(1) in

position.

STEP 6: Install two "AA" batteries into the METER(26), two batteries included. See page 8 for detailed battery installation instructions. Slide theMETER(26) onto the plate on theU-SHAPED HANDRAIL(5). Connect the UPPER EXTENSION WIRE(28) to the METER(26).

STEP 7: Attach the BUMPER STANDS(22) to the bottom of the BASE FRAME(1).

NOTE: The BUMPER STANDS(22) may be stored on the end of theBASE FRAME(1) to increase the angle of the treadmill and reduce the walking resistance. See page 10 for details on adjusting the walking resistance.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 45-1002B Weight on this product should not exceed 250 lbsCustomer Service Number 800 This Product is Produced Exclusively byTable of Contents Safety InstructionsMonday Friday, 800 A.M. 500 P.M., Central Time 800InMotionTM II Treadmill Before YOU BeginPart No. and Description Hardware Identification ChatStep Assembly InstructionsAttach the Bumper STANDS22 to the bottom of the Base FRAME1 HOW to Install and Replace Battery Using the Electronic MeterFunctions Belt Drifting Left Treadmill AdjustmentsBelt Alignment Belt TensionMaintenance Treadmill Adjustments Walking ResistanceTreadmill Remove the Pull PIN11 from the Right Upright FRAME3 Remove the Pull PIN9 to unlock the Base Frame ASSEMBLY1Storage Unfold the InMotionTM II TreadmillBack Product Parts DrawingQTY DIAGRAM# Part NameWarranty Limited WarrantyModel 45-1002B Telephone FAX Online Mail FAX/MAIL Ordering Form
Top Page Image Contents