ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cle ared area and position them on the floor in front of you. Re move all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
parts@staminaproducts.com
Sensor Wire
STEP 1
NOTE: The LEFT UPRIGHT(2) is the one with the Sensor Wire.
Attach the LEFT and RIGHT UPRIGHTS(2, 3) to the UPRIGHT SUPPORT(4) with HEX BOLTS (M10 x 20mm)(38) and WASHERS(M10)(47).
STEP 2
Slide the SPRING(7) onto the SPRING PIN(6). Insert the threaded end of the SPRING PIN(6) through the collar on theRIGHT UPRIGHT(3)and screw theBALL KNOB(8) onto the thread end of the SPRING PIN(6). Tighten the BALL KNOB(8) as tight as you can by hand.
6