ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com under the Service section and order the part needed,
NOTE: DO NOT SECURELY TIGHTEN ALL BOLTS UNTIL STEP 2.
STEP 1
Refer to the illustration below. Attach the UPRIGHT FRAME(1) to the RIGHT BASE(2) and LEFT BASE(3) with BUTTON HEAD BOLTS(M10x1.5x25mm)(5) and ARC WASHERS(M10)(6).
LEFT
Flanage Plates
face out.
RIGHT
7