CBM1000 Service Manual
3.1 Disassembly Procedure
Disassembly procedure consists of the following two sections.
• Main body
• Mechanism
3.1.1 Disassembly Procedure for Main Body
1. Removing the Power Case SA (for AC Adap- trer
(1) Disconnect the power connector from the unit.
(2) Remove the four screws M3 ×8 (ST) and detach the power case SA.
Power Connector
M3×8 (ST)
Power Case SA
2.Removing the Printer Cover SA
(1)Open the printer cover SA.
(2)Unhook the parts “A” and detach the printer cover SA.
(3)Remove the two screws M3 × 8 (BT). While opening the parts “B”, remove the part “C”.
B
C
Printer Cover SA
M3×8 (BT)
A
– 8 – | CITIZEN |
