Main Chassis Idle Gear Reduction Gear Gear Holder M3×6 ST

CBM1000 Service Manual

4.Removing the Gears

(1)Remove the two screws M3 × 6 (ST) and remove the gear holder.

(2)Remove the reduction gear and idle gear from the gear holder, in that order.

Note on reassembling:

Apply grease (Molykote EM-10L) to the shafts of the gear holder.

Main Chassis

5.Removing the Auto Cutter SA

(1)Remove the four screws M3 × 6 (ST) and remove auto cutter SA.

Auto Cutter SA

Main Chassis

M3×6 (ST)

6.Removing the Lock Levers

(1)Remove the EXT spring-01.

(2)Pull out the ejector.

(3)Remove the lock lever-R-SA from the right end of the lock lever-L-SA.

(4)Remove the lock lever-L-SA by pulling it to the left.

Main Chassis

EXT Spring-01

Lock Lever-R-SA

Ejector

Lock Lever-L-SA

– 14 –