Citizen CBM1000 service manual Pressure Arm-R M3×6 ST EXT Spring-01 Pressure Arm-L

CBM1000 Service Manual

7. Removing the Pressure Arms

(1) Disengage the EXT spring-01 from the

pressure arm-L and then remove the Main Chassis pressure arm-L from the main chassis.

(2)Disengage the EXT spring-01 from the pressure arm-R and then remove the pressure arm-R from the main chassis.

(3)Remove the one screw M3 × 6 (ST) from the main chassis.

Pressure Arm-R M3×6 (ST)

EXT Spring-01

Note on reassembling:	Pressure Arm-L
Securely insert the pressure arm-L/R
into the screw heads.

8.Removing the Stepping Motor and Brake

(1)Remove the two screws M3 × 4 and de- tach the stepping motor.

(2)Remove the one screw M3 × 6 (ST) and detach the brake.

Notes on reassembling:

Reassemble the brake in the direction shown in the figure.

When reassembling the stepping motor, position it so that its cable runs down- ward as shown in the figure.

M3×6 (ST)

Brake

Main Chassis

M3×4

Stepping Motor

– 15 – CITIZEN