Storage, Maintenance | Stamina Products 15-0100 guide

STORAGE

1.To store the hi-lo Cycle 100 simply keep it in a clean dry place.

2.The hi-lo Cycle 100 is 16 1/8" long (min.) x 16" wide x 17 3/4" tall.

3.Grasp the Front and Rear Stabilizer to move the hi-lo Cycle 100. Do not use the Pedals to move the hi-lo Cycle 100. The Pedals will move and the Crank may pinch your hand or fingers.

4.To avoid damage to the electronics, remove the batteries before storing the hi-lo Cycle 100 for one year or more.

MAINTENANCE

The safety and integrity designed into the hi-lo Cycle 100 can only be maintained when the hi-lo Cycle

100 is regularly examined for damage and wear. Special attention should be given to the following:

1.Adjust the TENSION KNOB(26) and verify that the TENSION BELT(24) provides tension. The TENSION BELT(24) should provide many years of use.

2.Verify that the Pedals are tightened securely. If tightening is required, remember that the left Pedal has left hand threads and is tightened by turning counterclockwise.

3.Do not step on any portion of the plastic cover when using the hi-lo Cycle 100. This can cause the plastic cover to crack.

4.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

5.Worn or damaged components shall be replaced immediately or the hi-lo Cycle 100 removed from service until repair is made.

6.Only Stamina Products supplied components shall be used to maintain/repair the hi-lo Cycle 100.

7.Keep your hi-lo Cycle 100 clean by wiping with an absorbent cloth after use.