Assembly & Operational Instructions

STEP 1: Insert the STABILIZERS(2) into both ends of the MAIN FRAME(1) and secure with BUTTON HEAD BOLTS(M8x1.25x12mm)(16) and ARC WASHERS(M8)(17).

DO NOT TIGHTEN COMPLETELY.

Adjust the STAND CAPS(3), set the inSTRIDE CYCLE XL on the floor and tighten the bolts.

STEP 2: Bolt the T KNOB(14) into the hub on the MAIN FRAME(1).

STEP 3: Slide the TIMER(18) onto the plate on the MAIN FRAME(1).

NOTE: There are two adjustment holes on each side of the PEDAL STRAPS(12). Select the adjustment holes which allow your feet to be easily removed from the PEDALS(11).

CAUTION: The surface of the crank housing may become hot during use, so allow it to cool before moving. Read the cautions posted on the inSTRIDE CYCLE XL.

Caution Decal

(both sides)