OPERATIONAL INSTRUCTION
HEADREST ADJUSTMENT
The HEADREST(32) on the CARRIAGE(25) can be positioned flat or at an incline by simply pivoting the support bracket underneath the HEADREST(32).
Support
Bracket
PULLEY ADJUSTMENT
There are three adjustment holes on each side of the PULLEY POST(36) for attaching the PULLEY SETS(38) in different widths. Remove the ADJUSTMENT KNOBS(40) and ARC WASHERS (M8)(70) from the PULLEY POST(36). Attach the PULLEY SETS(38) to the position you want and secure with the ADJUSTMENT KNOBS(40) and ARC WASHERS(M8)(70).
NOTE: Always use the same adjustment holes for both sides.
FOOTBAR ADJUSTMENT
The FOOTBAR(17) can be positioned at three angles. Lift the FOOTBAR(17) until the pins come out of the slots on the FRONT BRACE(1). Move the FOOTBAR(17) to the desired position and lock the FOOTBAR(17) in position by pushing it down so that the pins are in the slots on the FRONT BRACE(1).
NOTE:
1.Always make sure the pins are locked into the slots properly.
2.Use forward position of the FOOTBAR(17) when standing on the AeroPilates
Pro XP556 with one foot on the FRONT
WOODEN PLATFORM(3).
FORWARD
POSITION
SLOT |
PIN |
11