ASSEMBLY INSTRUCTIONS
BUTTON |
PIN(19) |
STEP 9
Insert the PULLEY POST(36) into the REAR WOODEN PLATFORM(14) and secure with SOCKET BOLT(M10x1.5x35mm)(57). Insert the PULLEY SETS(38) through the PULLEY SPACERS(39) and the PULLEY POST(36) and secure with ADJUSTMENT KNOBS(40) and ARC WASHERS(M8)(70).
STEP 10
Screw the two FOAM PADS(34) into the CARRIAGE(25).
STEP 11
The FOOTBAR(17) and the CARDIO REBOUNDER(46) cannot be used at the same time. For cardio workouts, install the CARDIO REBOUNDER(46) and for Pilates workouts, install the FOOTBAR(17).
1.To install the FOOTBAR(17), insert the FOOTBAR(17) into the LEFT and RIGHT FOOTBAR SUPPORTS (15, 16) and slide down until BUTTON PINS(19) lock into position.
2.To remove the FOOTBAR(17), grasp the FOOTBAR(17) on both sides close to the FOOTBAR SUPPORTS(15, 16). Press the BUTTON PINS(19) at the same time, pull up, and remove.
3.Refer to the inset drawing. To install the CARDIO REBOUNDER(46), insert the CARDIO REBOUNDER (46) posts into the holes in the FRONT WOODEN PLATFORM(3).
9