Assembly Instructions

STEP 4

NOTE: There are two sets of holes in the MAIN SUPPORT(3) which allows you to attach the FOAM ROLL POST(8) to two different positions. Try the upper position first.

Attach the FOAM ROLL POST(8) to the MAIN SUPPORT(3) with the SUPPORT PLATE(11), HEX BOLTS (M10x1.5x70mm)(18), WASHERS(M10)(23), and NYLOCK NUTS(M10x1.5)(25). Press the NUT CAPS(M10)(26) onto the bolt heads of HEX BOLTS(M10x1.5x70mm)(18) and NYLOCK NUTS(M10x1.5) (25).

STEP 5

NOTE: There are two adjustment holes in the FOAM ROLL POST(8). These adjustment holes allow users to adjust the position of the FOAM ROLLS(16). Try the upper hole first.

Slide a FOAM ROLL(16) onto the SUPPORT TUBE(9). Insert the other end of the SUPPORT TUBE(9) through the upper hole in the FOAM ROLL POST(8). Slide another FOAM ROLL(16) over the protruding end of the SUPPORT TUBE(9).