Sears 24959 user manual Symptom The walking belt slows when walked on

Page 27

Locate the Reed Switch (52) and the Magnet (50) on the left side of the Pulley (49). Turn the Pulley until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If nec- essary, loosen the #8 x 3/4" Tek Screw (14), move the Reed Switch slightly, and then retighten the Screw. Reattach the Motor Hood (not shown) with the five #8 x 3/4" Screws (not shown) and run the treadmill for a few minutes to check for a correct speed reading.

Top

 

View

49

52

14

50

1/8 in.

 

SYMPTOM: The incline of the treadmill does not change correctly

a.Hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Press the Stop button and then press the Incline increase or decrease button. The tread- mill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. If the incline does not begin calibrating, press the Stop button again, and then press the Incline increase or decrease button again. When the incline is calibrated, remove the key from the console.

SYMPTOM: The walking belt slows when walked on

a.Use only a surge suppressor that meets all of the specifications described on page 16.

b.If the walking belt is overtightened, treadmill per- formance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.

b

2–3 in.

Idler Roller Screws

c.Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may deterio- rate the walking belt and cause excessive wear. If you suspect that the walking belt needs more lubricant, see the front cover of this manual.

d.If the walking belt still slows when walked on, see the front cover of this manual.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents QUESTIONS? Model No Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly See the inset drawing. Tie the wire tie Be careful not to pinch any wires. Insert twoTighten the Screws yet Attach the Right Upright not shown Base Covers into place yet Screws, but do not tighten them yet Screw 1. Be careful not to overtighten Screws Page Page Page Have a second person hold the Frame until is completed Operation and Adjustment HOW to Connect the Power CordUse a Surge Suppressor Console Diagram Features of the Console Insert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeFollow your progress with the displays Change the incline of the treadmill as desiredPower cord. Important If you do not do When you are finished exercising, removeAdjust the incline of the treadmill to the lowest Setting. The incline must be at the lowest setHOW to USE AN Onboard Workout Select an onboard workoutStart the workout Insert the iFit module into the console HOW to USE a SET-A-GOAL WorkoutHOW to USE AN Ifit Workout Set a calories, distance, or time goalStart the workout. See on HOW to USE the Stereo Sound SystemSelect the optional screens Information ModeSelect the information mode Exit the information modeHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesQty Description Part ListDescription Qty Drawing Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT

24959 specifications

Sears 24959 is a notable product that has garnered attention for its blend of functionality, design, and user-friendly features. This model, housed in a well-recognized line of products, showcases a commitment to quality and value that is synonymous with the Sears brand.

One of the main features of the Sears 24959 is its robust construction, which ensures durability and longevity. The materials used in its design not only contribute to its overall sturdiness but also enhance the aesthetic appeal. The finish is crafted to withstand daily wear and tear while maintaining a sleek look that can fit seamlessly into various environments.

Another significant aspect of the Sears 24959 is its versatile functionality. Whether it is used for regular household tasks or specialized activities, the model is engineered to deliver reliable performance. Users can expect a range of capabilities that cater to different needs, making it a valuable addition to any home or workspace.

Technology plays a crucial role in the Sears 24959, integrating modern innovations that optimize user experience. One of the standout technological features is its intuitive interface, which simplifies operation. This allows users of all skill levels to navigate the settings effortlessly, contributing to a more enjoyable and efficient experience.

Energy efficiency is another hallmark of the Sears 24959, which has been designed to minimize environmental impact while maximizing output. By incorporating energy-saving features, it not only helps reduce utility costs but also supports sustainable practices.

The ergonomic design of the Sears 24959 is another highlight, providing comfort and ease of use. This consideration makes it accessible to a broader range of users, including those who may have physical limitations. The layout and controls have been thoughtfully arranged, ensuring that interactions with the product are smooth and hassle-free.

In summary, the Sears 24959 stands out due to its durable construction, versatile functionality, advanced technology, energy efficiency, and ergonomic design. It represents a commitment to quality that is expected from Sears, making it a reliable choice for consumers seeking practicality and performance in their everyday tasks.
Top Page Image Contents