|
| 8. Troubleshooting | |
|
|
| |
Problem |
| Solution | |
Power is not ON | • Check if the plug is connected to main power. | ||
• | Check if there is any blown fuse. | ||
| |||
|
|
| |
Alarm is on | • | Check if the connection between air tube connector to | |
| pump unit is tightly secured. | ||
(audible & visual) | • Check if the CPR is sealed. | ||
• | Check if there are any leakage on air cells. | ||
| • | Check if all tubing connections along mattress are secured. | |
Patient is bottoming out | • | Pressure setting might be inadequate for the patient, | |
| adjust comfort range 1 to 2 levels higher and wait for a | ||
|
| few minutes. | |
Mattress becomes too firm and | • This may happen when the AUTOFIRM is activated for | ||
pressure can’t be reduced. |
| too long. Release some air by disconnecting the air tube | |
| connector and change to preferred setting. | ||
|
| ||
| • | Check if all the snap buttons or straps of mattress are | |
Air Mattress is loose | • | all securely fastened. | |
Check if the mattress is fixed to the bed frame by | |||
|
| elastic straps. | |
Air tube connector won’t fit | • | Press handles on both sides of air tube connector | |
• | slightly before pushing the connector into the pump unit. | ||
into the pump unit | Make sure the connector is tightly secured by hearing | ||
|
| “click” while pushing it into pump unit. | |
Large airflow from air | • | This is normal since this system has high airflow and | |
bladders |
| numerous air loss holes on all bladders. | |
|
|
| |
If your questions can't be answered with above information, it might require a technician to take care the problem. Please contact your local dealer directly.
12