Lumex Syatems 763400A manual Operation Function Description, Power, Alarm Mute, Panel Lock

Page 8

4. Operation

NOTE: Always read the operating instructions before use.

4.1 Function Description:

POWER

Two conditions:

1. To turn on control unit. It takes approximately 1 minute to inflate the mattress. The default setting is at a comfort range, level 6, for the quickest inflation time.

2. To turn off Power Failure Alarm in the event of a sudden power outage during normal use.

ALARM MUTE

Enable and disable the audible alarm feature. Press this button to silence the audible alarm. The alarm buzzer will sound again after 3 minutes if the pressure has not yet returned to the normal condition.

PANEL LOCK

To lock the current setting and prevent others from changing. To unlock the panel, press this button and hold it for 3 seconds.

LOW PRESSURE INDICATOR

3 Conditions

1. No light - normal condition; mattress is operating properly.

2. Yellow light - pressure has not reached the preset setting.

3. Flashing yellow light - low pressure condition.

7

Image 8
Contents Operators Manual Contents Read ALL Instructions Before Using SymbolsIntroduction General InformationIntended Use For US and Canada onlyProduct Description Pump and Mattress SystemInstallation Unpacking Setting UpInstallation tips are listed below Power Alarm MuteLOW Pressure Indicator Operation Function DescriptionAutofirm StaticPulsation Comfort RangeComfort Range Setup Low Pressure and Alarm FunctionOperating Instruction CPRPower Failure Alarm Cleaning Pump UnitMaintenance General Air Filter ReplacementFuse Replacement StorageTroubleshooting Problem SolutionSpecifications Technical DescriptionA., Corporate Headquarters Graham-Field Health Products