Morphy Richards EB75310 manual Setting the timer, Safety features Button lock feature

75310 rev2 11/1/08 15:33 Page 9

H

START

TIMER

7:00PM

Setting the timer

1Move the slider to timer position.

2The start and timer symbols will appear, plus the hour will flash. Use the up and down buttons to select the required start time, ensuring it is on the correct AM or PM. When the desired hour is selected, press the mode button H.

7The programmed time is stored even when the switch is moved to the OFF position.

To use the stored programme, simply move the slider switch to timer position.

8To change the programme, move the slider to the timer position and press the mode button and repeat steps 1-5.

3

I
TIMER	4
FINISH	11.30PM

J

5

PRE-HEAT 7.30 PM

K

7.30 PM

6

Then the minutes will start to flash, select the desired start time (this setting adjusts in 15 minute steps). When selected, press the mode button.

Timer and finish will appear, plus the hour will flash. Use the up button to select the required finish time, ensuring it is on correct AM or PM. When the correct hour is selected, press mode. Then the minutes will start to flash, select the required time. Then press the mode button (this setting adjusts in 15 minute steps) I.

The heat level will start to flash, use the up and down arrows to select the required heat level.

Press the mode button. The pre-heat symbol will flash. If this is required, then press the mode button (if not required, then press the down arrow button before the mode button).

NOTE: The pre-heat feature will pre-heat the bed at high level (H) for the first 30 minutes of programed time before reverting to the selected heat level J.

The clock symbol will then appear, indicating that the timer function is set.

Once the timer function is set, the programme details are stored in the memory.

If left in timer mode, the blanket will automatically switch ON and OFF at the set time each day.

Safety features

Button lock feature

Press mode then boost to lock the buttons. To unlock, press mode then boost. This will prevent accidental operation while asleep. When the lock is activated, the LOCK symbol will appear on the LCD screen K.

8 Helplines: 0845 077 7700 (UK) 1800 409 119 (Republic of Ireland)