Canon installing your multifunction to additional computers on your network manual

Page 4

Preparing to Connect My Multifunction

To My Network

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported.

A router or access point is required for your printer to be used on a wireless network.

Notes on Network Connection

The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.

In an office setup, consult your network administrator

If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.

If an error message appears or if you have trouble with the network connection, refer to the printed manual: Network Setup Troubleshooting.

Place the machine and computer on the same network segment.

4

Image 4
Contents Pixma MG5420 Preparing to Connect My Multifunction to My Network Preparing to Connect My Multifunction To My Network Network RequirementsPlace the machine and computer on the same network segment Installing the Drivers & Software Software InstallationInstalling the Drivers Installing the Drivers Reference Installing the Drivers Reference Installing the Drivers Click Next Continue to follow instructions. On the Software Add the Printer Reference Click Next Installing the Drivers using downloaded files Click here to access the MG5420 Drivers & SoftwareInstalling the Drivers using downloaded files