Canon installing your multifunction to additional computers on your network manual

Page 6

Installing the Drivers

Installing the PIXMA MG5420 to additional Mac computers on your Wireless Network

If your MG5420 has already been set up for on your wireless network , it is only necessary to install the software on the additional computer(s). Connection to the network is confirmed automatically. It is not necessary to make any changes or settings on the printer itself.

The printer does not have to be reset or connected via USB cable to the additional computer(s).

Simply insert the Setup CD-ROM* that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.

*If you do not have or cannot use the provided CD-ROM, you can still install the printer on your wireless network. Click here for instructions.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Pixma MG5420 Preparing to Connect My Multifunction to My Network Preparing to Connect My Multifunction To My Network Network RequirementsPlace the machine and computer on the same network segment Installing the Drivers & Software Software InstallationInstalling the Drivers Installing the Drivers Reference Installing the Drivers Reference Installing the Drivers Click Next Continue to follow instructions. On the Software Add the Printer Reference Click Next Installing the Drivers using downloaded files Click here to access the MG5420 Drivers & SoftwareInstalling the Drivers using downloaded files
Top Page Image Contents