Kraz™ X1
part number 2000000451
POLE ASSEMBLY PART |
Main Tent Pole |
Part No. |
Foot Pole |
Part No. |
Rainfly |
Part No. |
1
Layout & Positioning
Two side doors
of Tent, Pole Assembly
Pole Sleeve
2
– Layout and position tent with doors facing |
|
|
|
|
| ||
desired direction. (illus. 1) |
|
|
|
|
| ||
– For best results in windy conditions position |
|
|
|
|
| ||
end of tent into the wind. |
|
|
|
|
| ||
– Stake down tent corners using the stake loops. |
|
|
|
|
| ||
Keep the floor taut. Unzip doors. (illus. 2) |
|
|
|
|
|
| |
| illus. 1 |
|
|
| |||
– Assemble Frame Poles by interlocking |
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
and one short “U” shaped pole. |
|
|
|
| illus. 2 | ||
– Insert the longer pole through the pole sleeve |
|
|
|
| |||
located in the middle of the tent and the shorter |
|
|
|
|
| Tent stake | |
|
|
|
| through Loop | |||
pole into the sleeve at the foot of the tent. (illus. 1) |
|
|
|
|
| ||
|
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Connect Frame to Tent | Frame Clips |
| illus. 5 |
–Insert one Pole Talon™ into pole on stake loop located at middle edges of the tent.(illus. 3)
–Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pole talon into the pole.(illus. 3 & 4)
–Attach Frame Clip on each side of tent. (illus. 5)
–Tie frame ties around the tent pole.
illus.3
Insert Pole Tip
illus.4into grommet Tent completely set up and
staked out.