Coleman manual Instructions apply to Part Number 9273A827C

Page 1

Tioga Backpacker

Instructions apply to Part Number 9273A827C

When You Are Ready

To Set Up Your Tent

Select a level campsite clear of rocks, branches and other hard or sharp objects.

Do not set up your tent under trees.

For best results in windy conditions, do not position the door of tent into the wind.

POLE ASSEMBLY PARTS

Part No. 9273A2231

(2)Main Tent Poles

Part No. 9273A2241

(1)Rainfly Pole

Rainfly Part No. 9273A2221

1 Layout & Positioning of Tent, Pole Assembly

Layout and position tent with door facing desired direction. (illus. 1)

Unzip door.

Stake down tent corners only, using the rings at the end of the stake loops. Keep the floor taut. (illus. 2)

Assemble frame poles by interlocking shock-corded poles. This will make two long poles.

Insert the poles diagonally into pole sleeves. The center of the poles should cross forming an “X” in the middle of tent. (illus. 1)

Assembled poles inserted through pole sleeves

illus. 1

illus. 2 Tent stake

through ring

2 Connect Frame to Tent

– Insert one end of main tent pole end onto pin of pin & ring system, at tent corner. (illus. 3)

– Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole.

– Repeat for second pole.

illus. 4

Tent frame set-up

illus. 3

Insert pole end onto pin & ring

Image 1
Contents When You Are Ready To Set Up Your Tent Layout & Positioning of Tent, Pole AssemblyInstructions apply to Part Number 9273A827C Things You Should Know Attach Tent to Frame Using Frame ClipsInstructions relatives au modèle 9273A827C Étalez et positionnez la tente et les mâtsQuand vous êtes prêt à monter votre tente Fixez la toile à l’armature à l’aide des crochets Attachez le double toitRenseignements essentiels